DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

Dinilai 5.00 dari 5 berdasarkan 1 penilaian pelanggan
(1 ulasan pelanggan)

Rp 16.500.000 Rp 14.990.000

Hemat: Rp 1.510.000

Produk Discontinue

Pengganti: DJI Ronin-S 

Stok Sementara Kosong

Masukkan NOMOR HP Anda, kami akan hubungi Anda saat barang tersedia

Stok habis

Berat : 7.4kg
SKU: 1262010 ,
Brand:

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer dari DJI adalah sebuah sistem stabilisasi kamera video yang dirancang untuk memberikan operator keleluasaan dalam merekam tanpa khawatir adanya getaran atau goncangan dari tangan saat melakukan pengambilan gambar video.

DJI Ronin ini cocok untuk sebagian besar jenis kamera dan kamera modifikasi dengan berat hingga 8 pound atau +- 3.6kg. DJI Ronin juga menggunakan brushless motor yang bekerja pada 3 axis: satu untuk sisi ke sisi roll” – menjaga tingkat horizontal – satu untuk tilt, dan satu untuk pan. Sistem ini dikendalikan komputer dan dilengkapi dengan tilt range 105⁰ atas /  165⁰ bawah dan ditambah roll range ± 110⁰. Selain itu, sistem ini menmberikan kontrol presisi ± 0,02 °, memungkinkan kamera bergerak tepat dan koreksi stabilitas gerakan yang sangat baik.

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

Deskripsi lanjutan dalam bahasa Inggris:

Suitable for most camera types and configurations up to 8 pounds, the DJI Ronin-M uses brushless motors that work on three axes: one for side-to-side “roll” – keeping the horizon level – one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The DJI Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the DJI Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.

  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Tool-Less Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode For Quiet Operation
  • USB and PowerTap Power Outputs

Video – Preparing and Balancing Your Ronin-M

Video – Tuning your Ronin-M Assistant App

DJI – Lifted: A Short Film Shot on the Ronin-M

DJI – Behind-the-scenes of “Lifted” Shot on DJI Ronin-M



























Performance
Load Weight (Reference Value) 8 lb / 3.6 kg
Angular Vibration Range ±0.02°
Maximum Controlled Rotation Speed Pan Axis: 90°/sTilt Axis: 100°/sRoll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°/sTilt Axis Control: +105° /-165°/sRoll Axis Control: ± 110°/s
Controlled Rotation Range Pan Axis Control: 360°/sTilt Axis Control: +105° /-165°/sRoll Axis Control: ± 25°/s























Electrical and Mechanical
Motor Type 3 x Brushless
Working Current Static Current: 300 mA (at 16 VDC)Dynamic Current: 600 mA (at 16 VDC)Locked Motor Current: 10 A maximum (at 16 VDC)
Sensors Independent IMU moduleTemperature sensor
Processing 32-bit DSP processor















Receiver
Frequency 2.4 GHz
Expandability D-Bus receiver supported















Connectivity
Wireless 2.4 GHz for transmitter (remote controller)Bluetooth 4.0
Wired 2 x 12 VDC regulated PowerTap1 x USB power output (500 mW)1 x DJI Lightbridge interface











System Requirements
Assistant Software Desktop:
Windows (32- or 64-bit): 8, 7, XP SP3Mac OS X: 10.9 or aboveMobile:iOS 7.0 or later































General
Control Modes Underslung ModeUpright ModeBriefcase Mode
Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 4.7" / 120 mmMaximum height measured from top of camera base plate: 7.7" / 195 mmMaximum width: 6.3" / 160 mm
Power Requirements 4S Ronin-M Battery
Operating Temperature -5 to 122°F / -15 to 50°C
Dimensions (W x D x H) 19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm
Weight 5.07 lb / 2.3 kg (fully loaded with handlebar)

- DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
- Ronin-M Transmitter (Controller)
- Ronin-M 4S Battery
- Battery Charger
- Handle Bar
- Tuning Stand
- Cable Pack
- Micro-USB Cable
- Camera Mounting Plate
- 2 x Camera Screw A (1/4"-20)
- 2 x Camera Screw B (3/8"-16)
- 2 x Camera Screw C (1/4"-20)
- 2 x Camera Screw D (3/8"-16)
- Lens Support Screw
- Lens Support
- 3 x Allen Wrenches

1 review for DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer

  1. Dinilai 5 dari 5

    Aldo (pembeli terverifikasi)

    Sdh beberapa kali belanja diplazakamera. selalu puas dengan pelayanannya.

Hanya pelanggan yang telah membeli produk ini yang dapat memberikan ulasan.

- Jatim : 1-3 Hari

- Jateng & Yogyakarta : 1-4 Hari

- Jabar : 1-4 hari

- Jabodetabek : 1-4 Hari

- Bali : 2-4 Hari

- Nusa Tenggara : 2-4 hari

- Sumatera ; 2-5 Hari

- Kalimantan : 2-4 Hari

- Sulawesi : 2-4 Hari

- Maluku & Papua : 2-6 Hari

NB: Lama pengiriman akan bertambah 7-10 hari kerja, jika unit terdapat baterai

Chat