Saramonic SR-AX101 XLR Adapter for DSLR & Camcorder
Saramonic SR-AX101 XLR Audio Adapter for DSLR & Camcorder dengan 2 channel XLR audio, merupakan adaptor yang ideal digunakan dengan camcorder atau kamera DSLR dengan built in jack mikrofon. Hal ini memungkinkan pengguna untuk menangkap kualitas audio profesional dari XLR output ke kamera / camcorder yang memiliki koneksi audio masukan 3.5mm (1/8 “).
Dengan berbagai macam perangkat audio seperti XLR mikrofon, mikrofon nirkabel, mixer audio eksternal, preamplifier dll dapat dihubungkan ke kamera melalui adaptor ini. passive operation memberikan kualitas suara yang sangat baik dengan dynamic range yang lebar. Tidak ada baterai atau sumber listrik yang diperlukan.
SR-AX101 sangat sederhana untuk mengatur dan menggunakannya. Dengan tombol-tombol kontrol langsung untuk setiap saluran, Anda dapat menyesuaikan tingkat perekaman. Ini adalah cara yang kompak dan ekonomis untuk menambahkan audio yang sangat baik untuk kamera / camcorder anda.
Fitur Saramonic SR-AX101 :
- Input: Dua XLR input. Satu 3.5mm (1/8 “) Auxiliary Mini-Jack Input.
- Output: Satu stereo 3.5mm (1/8 “) Mini-Jack Output
- Mono / Stereo Switch, LINE / MIC Switches, GND1 / GND2 Ground Switch
- Camera / camcorder mountable, plastic chassis dengan soket tripod
- Dual trim control knobs untuk menyesuaikan sinyal pada setiap saluran untuk tingkat perekaman optimal. Passive circuit agar bebas dari noise dan tidak membutuhkan daya baterai.
Spesifikasi Saramonic SR-AX101 :
Inputs | Two balanced XLR inputs. One 3.5mm (1/8”) Auxiliary Mini-Jack Input, ideal for connecting wireless devices with a 3.5mm output (as it sends signal to the right channel, please do not use the right XLR input whilst using the Auxiliary input). |
---|---|
Output | One stereo 3.5mm (1/8”) Mini-Jack Outputs audio signal from the adapter to the camera |
Dual Trim Control Knobs | Adjust the signal to each channel to the optimum recording levels |
Mono/Stereo Switch | Select mono or stereo output mode. The mono mode is for one mono microphone recording, it can send the mono audio signal to each channel and mix them together to output stereo audio signal. The stereo mode is for two channels recording, and provides two s |
Line/Mic Switches | Select LINE or MIC levels. The MIC level is for microphones or wireless systems. The LINE level is for mixers and other audio devices with a line level output. Set the LINE/MIC switch to LINE to attenuate the signal about 40dB |
GND1/GND2 Ground Switch | Eliminate Ground hum and noise for getting the best sound. |
GND1 | Separate the output signal ground from the input signal ground. To avoid the noise of the input signal passing to the output signal. This noise is usually caused by AC power, for example, a mixer with AC Power adapter |
GND2 | Connect the output signal ground to the input signal ground |
Input Level | MIC: -35dBu, LINE: -10 to +4 dBu |
Output Level | General Mic Levels |
Frequency response | 10Hz to 100kHZ (+/- 1.5dB) |
Dimensions | 87 (L) x 80 (W) x 52 (H) mm |
Weight | 191g |
Reviews
There are no reviews yet